2-METHYL-2-ADAMANTYL ACRYLATE;2-METHYL-2-ADAMANTYL ACRYLATE [249562-06-9] C14H20O2 FW220.31;2-Propenoic acid 2-methyltricyclo[220.127.116.11,7]dec-2-yl ester;2-MethyladaMantan-2-yl acrylate
Product Categories: :
Clear colorless liquid
In paper drums /Fluoride drums /iron drums /plastic drums/IBC Tank ,etc.
Shipment method :
By Sea ,Air ,Courier door to door ,etc.
Under room temperature ,keep away from direct sun light
Loading Port :
China any port ,Beijing ,Shanghai ,Hongkong
Shipped as non- dangerous chemicals
Analog Semiconductors, Light-Emitting Diodes LEDs, Solar Photovoltaics PV
A photoresist is a light-sensitive material used in several processes, such as photolithography and photoengraving, to form a patterned coating on a surface. This process is crucial in the electronic industry.The process begins by coating a substrate with a light-sensitive organic material. A patterned mask is then applied to the surface to block light, so that only unmasked regions of the material will be exposed to light. A solvent, called a developer, is then applied to the surface.
In the case of a positive photoresist, the photo-sensitive material is degraded by light and the developer will dissolve away the regions that were exposed to light, leaving behind a coating where the mask was placed.
In the case of a negative photoresist, the photosensitive material is strengthened (either polymerized or cross-linked) by light, and the developer will dissolve away only the regions that were not exposed to light, leaving behind a coating in areas where the mask was not placed.
Based on the chemical structure of photoresists, they can be classified into three types: Photopolymeric, photodecomposing, photocrosslinking photoresist.
Photopolymeric photoresist is a type of photoresist, usually allyl monomer, which could generate free radical when exposed to light, then initiates the photopolymerization of monomer to produce a polymer. Photopolymeric photoresists are usually used for negative photoresist, e.g. methyl methacrylate.
Photopolymerization of methyl methacrylate monomers under UV that resulting into polymer
Photodecomposing photoresist is a type of photoresist that generates hydrophilic products under light. Photodecomposing photoresists are usually used for positive photoresist.
Photolysis of a dizaonaphthoquinone that leads to a much more polar environment, which allows aqueous base to dissolve a Bakelite-type polymer.
Photocrosslinking photoresist is a type of photoresist, which could crosslink chain by chain when exposed to light, to generate an insoluble network. Photocrosslinking photoresist are usually used for negative photoresist.
The Related Products：CAS NO. 249562-06-9 2-Methyl-2-adamantyl acrylate
1. 1-Methacryloyloxy-3-adamantanol CAS NO.115372-36-6
2. 2-Ethyl-2-adamantyl acrylate CAS NO.303186-14-3
3. 1-Adamantyl methacrylate CAS NO.16887-36-8